Table of Contents
Advertisement
Introduction
Overview
The Repair / Adjustment section, Section 4 of the Service Manual, provides
information that enables the Service Representative to restore the product to
within specification after fault isolation.
Cautions:
•
Be sure to unplug the power cord whenever you are working on the
machine with one of the covers removed.
•
Be sure to remove the toner cartridge and place it into a dark container
before you remove any parts.
•
The close proximity of cables to moving parts makes proper routing a must.
All cables disturbed by the removal procedure must be replaced as close
as possible to their original positions. Before removing any component
from the machine, note the cable routing that will be affected.
•
If the machine is equipped with handset, remove the handset and cradle.
Releasing Plastic Latches
Many of the parts are held in places with plastic latches.
The latches break easily; release them carefully. To remove these parts, press
the hook end of the latch away from the part to which it is latched.
Introduction
12/98
www.printcopy.info
4 - 2
WorkCentre 385
Advertisement
Chapters
Table of Contents
