Xerox WorkCentre 385 Service Manual page 86

REP 4.29 Thermistor
Removal
1. Remove the following:
a. Fuser Assembly (REP 4.24).
2. Remove two screws from the fuser assembly.
REP 4.29 Thermistor
Be careful not to bend the IPR Ground Plate.
3. Remove the heat roller.
IPR Ground
Plate
4. Remove two screws, then remove the Thermostat.
12/98
www.printcopy.info
4 - 36
CAUTION
WorkCentre 385