Xerox WorkCentre 385 Service Manual page 101

Section Contents
Title
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - 5-1
PL 1.1 Main Assembly - - - - - - - - - - - - - - - - - 5-2
PL 2.1 OPE Unit Assembly - - - - - - - - - - - - - - 5-4
PL 3.1 Frame Lower Assembly - - - - - - - - - - - 5-6
PL 4.1 Fuser Assembly - - - - - - - - - - - - - - - - 5-8
PL 5.1 Front Assembly - - - - - - - - - - - - - - - - 5-10
Part NO. Index- - - - - - - - - - - - - - - - - - - - - - 5-12
WorkCentre 385
Page
www.printcopy.info
Introduction
Overview
The Parts Lists section provides exploded view
illustrations of all spared subsystem components
and a listing of the corresponding part numbers.
The illustrations show the relationships between
parts.
Organization of this Section
The following elements make up the Parts List
section:
Parts Lists (PL)
Each item number in the part numbers listing
corresponds to an item number in the illustration.
All the parts in a given subsystem of the machine
will be located in the same illustration or in a
series of associated illustrations. The parts which
are not spared are indicated by "- -" in the Part
column.
Exploded View Illustrations
An item that is called out on an illustration has a
corresponding listing within this section.
Components are given item
correspond to the part number listings.
Part Number Index
This index lists all the spared parts in the system
in numerical order. Each number is followed by a
reference to the parts list on which the part may
be found.
12/98
5 - 1
5 Parts Lists
numbers that
Introduction