Reinstalling Components - Juniper T4000 Quick Start Manual

T4000 Core Router Quick Start
18
Figure 7: Lifting the Router into the Rack

Reinstalling Components

NOTE: For complete instructions on reinstalling router components after
you have installed the router without a mechanical lift, see the
Router Hardware Guide
Slide each component into the chassis evenly so that it does not become stuck or
1.
damaged.
Tighten the captive screws for each component.
2.
Make sure that all empty slots are covered with a blank panel before operating the
3.
router.
.
Copyright © 2012, Juniper Networks, Inc.
T4000 Core