Operating Instruction; Boot Up; Measurement Parameter Setting; Parameter A/B - UNI-T UTR2810E Series User Manual

Operating Instruction

In this chapter you will learn the following：




3.1 Boot up

1）Press【POWER】key to boot up the instrument.
2）Enter test state after delay, see Figure 3-1, the actual situation may different.

3.2 Measurement Parameter Setting

Use【direction key】or【rotary knob】to move the cursor to the parameter to be test, press【rotary knob】or【ENTER】to
enter parameter setting, use【direction key】or【rotary knob】to select the corresponding parameter, and then press 【rotary
knob】or【ENTER】to confirm the setting.
In addition, press 【PARA A】can quickly cursor location to parameter A, press 【PARA B】can quickly cursor location to
parameter B.

3.2.1 Parameter A/B

Classification
Parameter A
（primary
parameter）
Boot up
First function operating
Second function operating
Function
L
C
R
Z
G
Y
D
Q
UTR2810E Series LCR Meter – User Manual
Figure 3-1 Test Mode
Description
Inductance value
Capacitance
Resistance value
Impedance value
Conductance value
Admittance value
Loss factor
Quality factor
13