Table of Contents
Advertisement
User's Manual
Basic Measurement
In this manual, key marked with [ ], such as [FREQ], [AMPT] and [Marker] are physical keys on the front
panel. In most cases, press one of this hard key to enter a function menu, this menu will display on the right
of the screen, such as center frequency and reference level. And these are called panel menus.
Key on Front Panel
This section is to introduce how to use the basic function.
Input Data
There are common ways to input and edit data
Use Panel Menu
Press panel menu (vertical permutation on the right of the screen) to enter the
corresponding function item, the following are examples of panel menu
Rest Spectrum Analyzer
Reset is for recall preset, set the system setting return to the specified state, here are four reset types,
Instruments.uni-trend.com
Rotary Knob
Increase or decrease the current numerical value
Direction Key
Increase or decrease the current numerical value
Numeric Key
Input numerical value and confirm (select a virtual key unit or
[Enter] key)
Virtual key
Touch panel menu to pop out dialog box, and then touch virtual
key to input numerical value and confirm (select a virtual key
"ENTER" or [Enter] key)
Enter Key
If input numerical value without unit or user want to use the
default unit to be the unit for this numerical value, press [Enter]
key as the termination key for this numerical value.
Switch
Press this panel menu to switch two modes of parameter
Sub-menu
Press this panel menu to enter sub-menu
Selection
Tap menu selection to change data, the selected menu will be
highlight
Correction
Double click the parameter that need to change to pop out the
modification menu, or select the data menu that need to change
and then press Enter key to modify it
UTS1000B/ T Series
22 / 76
Advertisement
Table of Contents
