Condensed Status Setup (Cond Setup) Profibus Pa Only (7.) - Siemens SITRANS LR460 Operating Instructions Manual

Parameter assignment

8.8 Condensed status setup (COND SETUP) PROFIBUS PA only (7.)

Acknowledge (ACK STATUS) (6.3.7.)
Read only: displays the status of the Maintenance Alerts that have been acknowledged.
Options (read
only)
In SIMATIC PDM, open the menu View - Device Status (PROFIBUS PA) or View – Status (HART),
click on the Maintenance tab and check the Calibration Interval window.
Acknowledge warnings (ACK) (6.3.8.)
Allows you to acknowledge either a Maintenance Required or a Maintenance Demanded
alert.
In SIMATIC PDM:
1. Open the menu View - Device Status (PROFIBUS PA) or View – Status (HART), and click on
the Maintenance tab.
2. In the Calibration Interval window, click on Acknowledge Warnings.
Options (read only)
8.8 Condensed status setup (COND SETUP) PROFIBUS PA only (7.)
8.8.1 Condensed status setup (COND SETUP)(Profibus PA only) (7.)
This device conforms with PROFIBUS Profile for Process Control Devices version 3.01.
Condensed Status was introduced in this version. The following sections allow the user to set
the level of severity of the errors listed and to tailor a device response appropriate for your
particular process.
Condensed status mode (COND STAT) (7.1.)
Options
Select Yes or No to enable/disable Condensed Status Mode.
114
NONE
ACK M REQ
ACK M DEM
BOTH
* NO
YES
None
Maintenance required acknowledged
Maintenance demanded acknowledged
Both maintenance required and demanded
acknowledged
IGNORE
ACK WARNING
Disabled
Enabled
Operating Instructions, 10/2021, A5E42035355-AB
SITRANS LR460