Mercedes-Benz EQE 350+ Owner's Manual page 72

O The child restraint system must not be put
under strain by the head restraint. Adjust the
head restraints as appropriate.
° When tting an i‑Size child restraint system,
also observe the following:
O When using a r When using a rearw earwar ard-f d-facing c acing child r
syst system: em: adjust the front seat so that it does
not touch the child restraint system.
O When using a f When using a forw orwar ard-f d-facing c acing child r
syst system: em: remove the head restraint from the
respective seat, if possible. In addition, the
backrest of the child restraint system must
lie as at as possible against the backrest of
the vehicle seat.
A er the child restraint system has been
removed, replace the head restraint immedi-
ately and adjust all head restraints correctly.
hild res estr traint aint
hild res estr traint aint
1 ISOFIX mounting bracket
2 i‑Size mounting bracket
Remove and stow away covers
#
Before every journey, make sure that the ISO-
#
FIX child restraint system or the i‑Size child
restraint system is engaged correctly in both
mounting brackets in the vehicle.
* N N O O TE TE Damage to the seat belt for the
centre seat during installation of the child
restraint system
Make sure that the seat belt is not trap-
#
ped.
Attach the ISOFIX or i‑Size child restraint sys-
#
tem to both mounting brackets in the vehicle.
A er removing the child seat, reattach covers
#
1 or 2.
F F ast astening a T ening a Top Tet
& W W ARNING
ARNING Risk of injury or death if the
rear seat backrests are not locked a er
Top Tether belts are tted
The rear seat backrests may fold forwards
1 or 2.
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Occupant safety
op Tether her
69 69