Mercedes-Benz EQE 350+ Owner's Manual page 214

Con guring Con gur ing t t he c he char harging se ging settings ttings
Multimedia system:
© EQ Charging
4 5 5
Se Setting t tting the c he char harging pr ging progr ogram am
Select Home, Work or Standard.
#
Opening t Opening the socke he socket t ap ap
Press Open socket flap.
#
The socket ap opens.
% Further notes on charging with alternating
current: ( page 201) or direct current:
/
( page 205).
/
U U nloc nlocking t king the c he char harging cable (mode 3 or 4) ging cable (mode 3 or 4)
When the function is active, the charging cable is
unlocked when the maximum charge level is
reached.
Select Home or Work.
#
Activate or deactivate Unlock charging
#
A A ctiv ctivating or deactiv ating or deactivating location-based c ating location-based char
Select Charge at home or Charge at
#
Activate or deactivate
#
tion.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, the
charging program is automatically switched over
as soon as parking position j is engaged.
A A ctiv ctivating or deactiv ating or deactivating EC
Activate or deactivate the function.
#
The ECO charging
voltage at charging stations to conserve the vehi-
cle's battery.
Se Setting t tting the depar he departur ture time
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. The charging process
always starts immediately, irrespective of the next
cable.
departure time.
harging ging
Select Departure
#
work.
The following charging times can be selected:
individual charging times
R
Select based on loca-
ating ECO c O char harging ging
function limits the charging
e time
time.
Driving and parking 211
On Week profile
R
Se Setting an individual depar tting an individual departur ture time e time
Select Add new time and set a new departure
#
time.
or
Select ´ and adapt an existing departure
#
time.
Se Setting t tting the r he repeat days epeat days
Select Add new time and set a new departure
#
time.
Mark the relevant weekdays for which the
#
departure time will apply and con rm with
a.
or
Select ´ and edit existing repeat days.
#
Se Setting a br tting a break in t eak in the c he char harging pr ging process
Up to four breaks in the charging process can be
set during which the vehicle is not charged, even
if it is connected to a charging station.
Select Charging interruptions.
#
211
ocess