Mercedes-Benz EQE 350+ Owner's Manual page 412

In the event of damage to the threads,
#
contact a quali ed specialist workshop
immediately.
Have the damaged wheel bolts or dam-
#
aged hub threads replaced.
Do not continue driving.
#
Observe the information on the choice of tyres
#
( page 401).
/
For tyres with a speci ed direction of rotation, an
arrow on the side wall of the tyre indicates the
correct direction of rotation. Observe the direc-
tion of rotation when tting.
* N N O O TE TE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
when removing and repositioning the wheel.
Do not raise the wheels by the plastic
#
elements when removing and reposition-
ing.
Slide the wheel to be mounted onto the cen-
#
tring pin and push it on.
& W W ARNING
ARNING Risk of injury from tightening
wheel bolts and nuts
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip.
Only tighten wheel bolts or wheel nuts
#
when the vehicle is on the ground.
Be sure to observe the instructions and safety
#
notes on "Changing a wheel" (
For safety reasons, only use wheel bolts which
#
have been approved by Mercedes-Benz and
for the wheel in question.
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated until they are
nger-tight.
Unscrew and remove the centring pin.
#
Tighten the last wheel bolt until it is nger-
#
tight.
Lower the vehicle ( page 409).
/
#
Lower ering t Low ing the v he vehicle
R R eq equir uirements: ements:
The new wheel has been tted (
R
* NO
NOTE TE Risk of vehicle jack becoming trap-
ped by the AIRMATIC system
If the AIRMATIC system has released air when
raising the vehicle, the jack can become trap-
ped when the vehicle is lowered.
Start the drive system. This adapts the
#
vehicle level.
page 401).
/
Remove the jack from under the vehicle.
#
T T o low o lower t er the v
#
the hexagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise.
Wheels and tyres 409
ehicle a er a er a wheel c a wheel change hange
page 408).
/
he vehicle: ehicle: place the ratchet onto
409