Mercedes-Benz EQE 350+ Owner's Manual page 394

% The transmission may be locked in position
j in the event of damage to the electrics. To
shi to i, provide the on-board electrical
system with power ( page 387).
/
V V ehicles wit ehicles with AIRMA h AIRMATIC TIC
* NO
NOTE TE Possible damage to the vehicle
when loading or unloading
When loading or unloading, the vehicle must
be raised to transport level.
If the transport settings are not shown or the
Vehicle not ready for loading
played, the vehicle may not be loaded or
unloaded.
If required, raise the vehicle to transport
#
level again.
A vehicle that cannot be raised to trans-
#
port level may not be loaded or unloaded
using a ramp. Consult a quali ed special-
ist workshop.
& W W ARNING
ARNING Risk of accident due to activa-
ted transport level
message is dis-
If the vehicle is raised to transport level, driv-
ing and driving safety systems have only limi-
ted availability and the view from the vehicle is
restricted.
Driving safety is severely restricted and there
is a risk of an accident!
Do not use transport level in normal road
#
operation.
Only activate and use transport level to
#
load the vehicle and when not on public
roads.
Breakdown assistance 391
Ensure that no persons or obstacles are
#
located in the area surrounding the vehi-
cle.
R R aising t aising the v he vehicle t ehicle to tr o transpor ansport lev t level el
V V ehicles wit ehicles with AIRMA h AIRMATIC TIC
Press the G button for at least ve sec-
#
onds.
Immediately press and hold the a button
#
for at least one second.
The For transport level, switch vehicle on
message is displayed.
Switch on the vehicle ( page 180).
/
#
The transport settings are displayed.
Swipe downward to select Transport level
#
press a.
The vehicle is raised and the
Do not drive on ramp message is displayed
for 5 seconds. The raising process can last up
to 60 seconds and can be cancelled with the
G button.
When raising, do not switch o the vehicle.
#
391
and
Vehicle rising...