Mercedes-Benz EQE 350+ Owner's Manual page 213

210 Driving and parking
210
A A ut utomatic rev omatic rever ersing function of t sing function of the electr
socke socket t ap ap
If an obstacle impedes the electric socket ap
during the closing process, the socket ap opens
again automatically and the driver's display shows
a corresponding display message. The automatic
reversing function is only an aid and is not a sub-
stitute for your attentiveness.
When closing the socket ap, make sure that
#
no body parts or objects are in the closing
area.
F F unction of t unction of the c he charg harge lev e level displa el display in t
display display
% The data shown in the illustration is example
data.
he electric ic
1 Range at current charge level
2 Current state of charge of the high-voltage
battery
y in the dr he driv iver's er's
3
Maximum state of charge (depending on the
setting)
4 Time remaining until completely charged (until
the selected maximum charge level is
reached)
5
Charge level recommended by Range Assis-
tant to reach the next destination
6 Dynamic charge level display
7 Current charging capacity
% Speci ed remaining range 1
di erent factors, e.g. driving style or topogra-
phy.
When the vehicle is connected to the mains sup-
ply and is switched o , the driver's display shows
the charge level display for approximately two
minutes.
%
The value of current charging capacity
di er from the display on the charging station.
At a charging capacity of 10 kW or higher, the
value in the charge level display is rounded o
and shown without a decimal place.
The value in 4 varies depending on the setting of
the charging process. It displays the charging pre-
diction, e.g. the time at which the selected charge
level will be reached or the charge level at the
pre-selected departure time.
may vary due to
7 can