Mercedes-Benz EQE 350+ Owner's Manual page 408

Chock
R
Wheel wrench
R
Centring pin
R
%
The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker a xed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a quali ed spe-
cialist workshop.
The tyre-change tool kit is located in tool bag
in the boot.
The tool bag contains:
Jack
R
Gloves
R
Wheel wrench
R
Centring pin
R
Folding chock
R
Ratchet for jack
R
Pr Prepar eparing t ing the v he vehicle f ehicle for a wheel c or a wheel change
R R eq equir uirements: ements:
The vehicle is not on a slope.
1 R
The vehicle is on solid, non-slippery and level
R
ground.
The required tyre-change tool kit is available.
R
%
If your vehicle is not equipped with the tyre-
change tool kit, consult a quali ed specialist
workshop to nd out about suitable tools.
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
#
position.
Shi the transmission to position j.
#
V V ehicles wit ehicles with AIRMA
#
level for greater ground clearance
( page 262).
/
Switch o the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
#
front and rear of the wheel that is diagonally
hange
opposite the wheel you wish to change.
Unload the vehicle.
#
R R aising t aising the v he vehicle when c
R R eq equir uirements: ements:
There are no persons in the vehicle.
R
The vehicle has been prepared for a wheel
R
change (
Important notes on using the jack:
Use only a vehicle-speci c jack that has been
R
approved by Mercedes-Benz to raise the vehi-
cle.
The jack is only designed for raising and hold-
R
ing the vehicle for a short time while a wheel
Wheels and tyres 405
h AIRMATIC: TIC: set the raised vehicle
ehicle when changing a wheel hanging a wheel
page 405).
/
405