Mercedes-Benz EQE 350+ Owner's Manual page 297

294 Driving and parking
294
Open the socket cap.
#
Insert the plug with lug 1 in groove
#
the socket.
Turn bayonet coupling 2 to the right as far as
#
it will go.
Let the cap engage.
#
Secure the cable to the trailer with cable ties
#
(only if you are using an adapter cable).
Make sure that the cable is always slack for
#
ease of movement during cornering.
Under the following conditions, a message may
appear on the driver's display even if the trailer
has been connected correctly:
LEDs have been installed in the trailer lighting
R
system.
The current has fallen below the trailer lighting
R
system's minimum current (50 mA).
%
Accessories can be connected to the perma-
nent power supply up to 180 W and to the
power supply that is switched on via the igni-
tion lock.
3 on
U U ncoupling a tr ncoupling a trailer ailer
& W W ARNING
ARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between the vehicle and the
trailer drawbar.
Do not uncouple trailers with an engaged
#
overrun brake.
* N N O O TE TE Damage during uncoupling with an
engaged overrun brake
The vehicle may be damaged if you uncouple
with an engaged overrun brake.
Do not uncouple trailers with an engaged
#
overrun brake.
Secure the trailer against rolling away.
#
Disconnect the electrical connection between
#
the vehicle and the trailer.
Uncouple the trailer.
#
Place the cover cap on the ball head.
#
%
T T r r ailer ailers wit s with LED lighting: h LED lighting: a er uncoupling the
trailer, switch the vehicle on and then o
again.