Mercedes-Benz EQE 350+ Owner's Manual page 212

% If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a quali ed specialist work-
shop.
% Status display 1 indicator lamp remains lit
for some time a er the charging cable con-
nector has been removed and then goes out.
Insert socket cover 4 into the lower vehicle
#
socket connection.
Close the socket ap.
#
For vehicles with an electric socket ap,
observe the notes at the end of the section.
Combo 2 vehicle socket Combo 2 v ehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1 lights up white. The vehicle socket is
unlocked.
Remove charging cable connector
#
the vehicle socket.
% If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a quali ed specialist work-
shop.
% Status display
for some time a er the charging cable con-
nector has been removed and then goes out.
Insert socket cover
#
socket connection.
Close the socket ap.
#
For vehicles with an electric socket ap,
observe the following notes on closing the
socket ap.
The electric socket ap closes automatically in
the following situations:
shortly a er the charging cable connector has
R
been removed
a er the socket ap has been tapped in the
R
direction to close it
3 from
a er the transmission position i, h or k
R
has been engaged
Driving and parking 209
209
1 indicator lamp remains lit
4 into the lower vehicle