Data Call - Nortel M2000 Reference Manual

8 Feature description
Table 6 Corresponding soft keys of the call processing states
supported by the M2317 (Sheet 2 of 2)
Call processing state
Busy
Rerorder
Ringback
ERWT_CBQ
Established
Intercom established
CONF/XFER dialtone
CONF/XFER dialing
CONF/XFER busy
CONF/XFER reorder
XFER ringback
CONF ringback
Consultation
Consultation hold
Private line dialing
Private line established
Voice call/group call established
If the MADO has no stored data rate, the incoming call prompt transmits
at 19.2 kyte/s. If the DTE is not set to that rate, garbage may display.

Data call

Incoming calls activate the most recently used KBD method. The
prompts transmit at the previously connected data rate. If the data rate
555-4001-110 Standard 09.03 July, 2002
Soft keys
RINGBAK, SAVE#
No soft keys
SAVE#
RINGBAK, SAVE#
CONFER, PARK, TIMER,
SAVE#, TRANSFER, PRIVACY,
MORE
TRANSFER, CONFER, TIMER,
SAVE#
SPEED#, SAVED#, RINGBAK
No soft keys
RINGBAK, SAVE#
No soft keys
CONNECT, SAVE#
SAVE#
CONNECT, SWITCH
CONNECT, SWITCH
SAVED#, LAST#
No soft keys
No soft keys