22 Keyboard dialing
Table 4 Hayes Keyboard Dialing commands (Sheet 3 of 3)
Command
&D2
&D3
&Q0
&Q5
&R0
&R1
&S0
&S1
Z0
Z1
&F
&Y0
&Y1
555-4001-110 Standard 09.03 July, 2002
Meaning
Go on–hook when the on–to–off transition of DTR
occurs. This command is the default if
ASSERTDTR DPOPT is not datafilled for MADO.
Go on–hook and reset to default settings (such as,
MADO profile configuration)
MADO ignores S37; connection is attempted at the
speed of the last autobaud command.
MADO attempts to connect at baud rate selected
by S37.
CTS, CD, and DSR track far-end RTS. This
command is the default if ASSERTRTS DPOPT is
not datafilled for MADO.
Assume CTS is always present. This command
asserts the EIA control leads CTS, CD, and DSR.
This command is the default if ASSERTRTS
DPOPT is datafilled for MADO.
Assume DSR is present. This command asserts
the EIA control leads CTS, CD, and DSR. This
command is the default if ASSERTRTS DPOPT is
datafilled for MADO.
CTS, CD, and DSR track far-end RTS. This
command is the default if ASSERTRTS DPOPT is
not datafilled for MADO.
Reset MADO to default settings.
Reset MADO to default settings.
Reset MADO to default settings.
Reset MADO to default settings.
Reset MADO to default settings.