Nortel M2000 Reference Manual page 13

xii About this document
Commands and fixed parameters
Commands and fixed parameters that are entered at a MAP terminal
are shown in uppercase letters:
>BSY CTRL
Variables
Variables are shown in lowercase letters:
>BSY CTRL ctrl_no
The letters or numbers that the variable represents must be entered.
Each variable is explained in a list that follows the command string.
Responses
Responses correspond to the MAP display and are shown in a different
type:
FP 3 Busy CTRL 0: Command request has been submitted.
FP 3 Busy CTRL 0: Command passed.
The following excerpt from a procedure shows the command syntax in
this document:
Manually busy the CNTRL on the inactive plane by typing
>BSY CTRL ctrl_no
where
cntrl_no
Example of a MAP response:
FP 3 Busy CTRL 0: Command request has been submitted.
FP 3 Busy CTRL 0: Command passed.
555-4001-110 Standard 09.03 July, 2002
is the number of the CNTRL () or 1)