Nortel M2000 Reference Manual page 44

19 Snap lens with card back in place.
20 Designate button labels for key designations.
21 Fold labels, insert inside plastic button cover, and snap button
cover over movable key, pressing down on key, as required.
22 Repeat Steps 20 and 21 for all keys.
Task is complete.
The following figure shows a veiw of the jacks and tabs at the base of
an M2000 digital telephone:
Figure 1 View of jacks and tabs at base of telephone
Meridian SL-100 M2000 Digital Telephone Reference Manual
Installation procedures 3
FW–xxxxx
Restraining tabs for line
and handsfree cord
Restraining tab for handset
cord
Icons identifying the
connector below
Handsfree unit or headset
TELADAPT connector
Line cord TELADAPT
connector
Handset TELADAPT
connector