Asr Process - Northern Telecom Meridian M3000 Reference Manual

Note: It is recommended that the customer group is established so that
the user can only dial the ASR in code. If the user is allowed to perform
normal telephone functions with the temporary datafill, there is no
incentive for the user to perform the ASR in process. If every user who
performs the ASR out process decides not to bring their set back into
service by performing the ASR in process, the maximum number of sets
allowed in the ASR out state would be reached quickly.
- The customer group identified in ASR_CUSTGRP is used for the
temporary datafill in Table KSETLINE along with a SUBDRP of 0
and an NCOS of 0.
•
The ASR feature is assigned on a customer group basis. Each customer
group allowed to perform ASR must have an entry in Table
CUSTHEAD identifying the ASR feature translator.
For a successful relocation, the new location must be equipped and datafilled
with the appropriate card type (8X47BA) in Table LNINV.

ASR process

To perform the ASR out process, follow the steps in Procedure 8-5. To
perform the ASR in process, follow the steps in Procedure 8-6.
If the user forgets the personal identification code in Procedure 8-5 Step 5, a
service personnel can use the QUERY command ASRSHOW, based on the
PDN of the set, to find the identification number dialed by the user.
If an error is made during the code collection, the user presses the asterisk
(*) key to restart. However, if treatment has been given, pressing the
asterisk does not allow the user to reenter the digits for that step. The user
must disconnect and try the ASR process again.
Displays associated with IVD sets are not used for any ASR processing
instructions.
Neither the ASR out nor the ASR in process is available during an image. If
the user attempts to perform the ASR process, treatment is given.
If a user mistakingly performs the ASR out process, only the service
personnel can return the LEN to service by:
•
accessing Table ASRTABLE and deleting the entry corresponding to the
personal identification code entered by the user
•
accessing the LTP level of the MAP workstation and BUSY the user's
line before returning it to service
Meridian 1 Options 201, 211 Meridian SL-100 M3000 Touchphone Reference Manual MSL03
Testing and maintenance 8-9