Xlaname - Northern Telecom Meridian M3000 Reference Manual

3
Table XLANAME
The Translation Name table controls the addition and deletion of the
translator to the IBN Translation table.
Each translator is assigned a 1- to 8- character name plus the default data.
Use the default data for the translator name whenever an access code is not
specified in Table IBNXLA.
Table 8-1 describes the fields for datafill. For more information on the
XLANAME table, see 555-4021-851 or 555-4031-851, Customer Data
Schema.
Table 8-1xxx
Table XLANAME
Field Name

XLANAME

DEFAULT
Meridian 1 Options 201, 211 Meridian SL-100 M3000 Touchphone Reference Manual MSL03
If the LCD does not flash, TADO IS UNDER TEST does not appear on the
screen, and reorder tone is received continuously, the TADO Self T est could not
be set up. Check to ensure power source is properly connected. Replace
handset and try TADO Self Test again at a later time. If TADO Self Test can not
be set up repeatedly, contact service personnel.
If confirmation tone occurs and TADO TEST IS COMPLETE appears on the
DTE screen, the TADO circuit board is in working order. If there is a data
communications failure, the DTE, RS-232-C interface, or cable could be faulty.
If reorder tone occurs for 5 seconds and TADO TEST IS COMPLETE appears
on the DTE screen the TADO Self Test failed. The power source may be
disconnected. If the power source is securely connected, contact service
personnel to replace the TADO circuit board.
Replace handset.
Response: TADO Self Test completed. The test is over when the handset is
replaced, regardless of whether the test has completed or not.
Note 1: If the HOLD key is touched during the TADO Self Test, the test is over
regardless of whether the test has been completed or not.
Note 2: If TADO Self Test is initiated and no tone is received within 15
seconds, reorder tone occurs followed by normal call treatment.
Value
alphanumeric
alphanumeric
Testing and maintenance 8-5
Comments
TRANSLATOR NAME. Enter the 1- to 8-
character name assigned to the customer, feature
or preliminary translator.
DEFAULT DATA. This field is identical to that
described in the RESULT field in Table IBNXLA.