Code Access; Feature Operation - Northern Telecom Meridian M3000 Reference Manual

Table 4-2xxx
Soft keys
Key
12
13
14
15
16
17
18
19

Code access

The following features can be assigned to a M3000 Touchphone as code
access features. These features are activated by dialing an access code. If
the M3000 Touchphone is not in the idle state, then the access code must be
preceded by touching the Conference 6 or Call Transfer position. If the
feature is assigned to the M3000 Touchphone as a touch position, it can not
be assigned as a code access feature.
•
•
•
•
•
•
For a description of each feature, refer to 555-4001-105, Meridian SL-100
Features and Services Description. For operation information, refer to
555-4001-315, Telephone Set/Attendant Console Operation and Test
Manual.

Feature operation

The touch sensitive screen of the M3000 Touchphone is shown in Figure
4-1. There are 12 display lines for each screen.
Meridian 1 Options 201, 211 Meridian SL-100 M3000 Touchphone Reference Manual MSL03
(continued)
Feature
Call Waiting
Call Transfer
Ring Again
Privacy Release
Make Set Busy
Call Park
Executive Busy Override
Automatic Answerback
Speed Call
Call Park
Directed Call Park
Executive Busy Override
Conference 6
Malicious Call Hold
Features description 4-3
-end-