Idle Position - Northern Telecom Meridian M3000 Reference Manual

4-16 Features description
Table 4-7xxx

IDLE position

IDLE Position
Directory (locking)
Message Waiting
Make a Call
Forward
Auto Answer
Procedure 4-1 provides the ability to route/retrieve calls to/from a customer
defined Message Center. The M3000 Touchphone also supports Message
Waiting with a Voice Message Center (VMX). Once the call to the VM is
connected, messages can be manipulated through the use of VMX code
access commands (see 555-4111-100, Voice Message Exchange Interface
General Description).
Note: The Call request Retrieve code is not used to retrieve messages from
VMX. The user dials the VMX Subscriber Access DN directly in order to
retrieve messages from their mailbox.
Procedure 4-1
Message Waiting
1
2
3
The procedure 4-2 describes how to make a touchphone call.
Procedure 4-2
Make A Call
1
2
555-4001-112 Standard 05.01 March 1995
Touch MESSAGE in the touch position, when the envelope icon appears on
the IDLE screen.
Response: The screen is updated to the Message screen.
Touch an idle DN position and dial the Message Center DN or Call Request
Retrieve (CRR) code.
Response: Message Center DN displays.
Release the call, after the Message Center answers and gives messages.
Response: MESSAGE indicator goes out.
Touch the MAKE A CALL touch position.
Enter the digits to be dialed.
Procedure
Procedure 4-9
Procedure 4-1
Procedure 4-2
Procedures 4-3 and 4-4
Procedures 4-5