Other Printing Problems - Lexmark Optra W810 Reference

Paper feed problems
Symptom
Universal size paper
repeatedly jams when
sent to bin 2 of the
finisher.
The
Paper Jam
message remains after
you remove the
jammed paper.
The page that jammed
does not reprint after
you clear the jam.

Other printing problems

Use the following table to find solutions to other printing problems you are experiencing.
Other printing problems
Symptom
The operator panel
display is blank or only
displays diamonds.
Cause
Sending Universal size paper to
bin 2 of the finisher is not
recommended.
You have not cleared the entire
paper path.
Jam Recovery in the Setup
Menu is set to Off.
Cause
The printer's self test failed.
Troubleshooting
222
Solution
Send all jobs printed on Universal
size paper to bin 1 of the finisher.
Clear paper from the entire paper
path, and then press
Refer to the User's Reference for
detailed instructions on clearing
paper jams.
Set Jam Recovery to Auto or On.
Solution
Turn the printer off, wait about 10
seconds, and turn the printer back
on.
appears on the
Performing Self Test
operator panel display. When the
test is completed, the
message is displayed.
If the messages do not appear, turn
the printer off and call for service.
.
Go
Ready