Lexmark Optra W810 Reference page 112

The printer Collation setting causes the operating system to handle the print job and all its
collated copies as one single job . The Collation - Collated Copies (QTY) setting, on the
other hand, causes the printer to handle each collated copy as a unique job .
You can, if you choose, use software applications to collate print jobs, but because such
applications resend the job for each copy you request, you may experience print time
delays. In addition, multiple collated copies of very large jobs require huge amounts of
disk space to buffer the job effectively. To ensure that the printer performs the collation
function, set Collation On using the printer operator panel, and make sure collation is
turned off in the software application and driver.
Using separator sheets
Use the Separator Sheets menu item on the Finishing Menu to insert blank pages
between jobs or between copies. This feature is especially helpful when processing sev-
eral collated documents. Use the Separator Source menu item to identify a specific paper
source where you have loaded the paper you want to use as separator pages.
Memory constraints
Occasionally your printer may experience a memory shortage while printing a collated
job. If this happens, the printer displays a error message,
37 Insufficient Collation Area
pauses for a period of time, then continues to collate the job.
Note: You must have previously set the Auto Continue menu item to On if you want
the printer to continue printing after experiencing a memory shortage.
If you frequently collate large print jobs, you can help avoid memory problems by installing
an optional hard disk device. Remember, though, that if you partition the hard disk for job
buffering, you can't use that particular storage area for collation.
See "Managing memory" on page 164 for more information on memory usage and solv-
ing memory related problems.
Paper handling
112