Lexmark Optra W810 Reference page 188

The following table provides more information about the MarkNet internal print servers
and their topologies .
MarkNet N2000 Series of internal print servers
Adapter
N2000t
N2001e
N2002e
N2501e
MarkNet S internal print servers
Adapter
MarkNet S Ethernet 10Base2/T
MarkNet S 10BaseT/100BaseTX
MarkNet S Token-Ring 16/4MBps
Periodically Lexmark releases updates to the firmware which may provide new functions
or support for new network protocols. Update the firmware at any time by flashing , or
reprogramming, the flash memory in the adapter. Simply download the most current flash
files from the Lexmark Web site (www.lexmark.com) free of charge. Use FTP commands
or MarkVision to flash the print server. Refer to the documentation that came with your
print server for more information on flashing.
For information about installing internal print servers and tri-port cards, refer to the Setup
Guide . For information about setting up a printer for a particular network, refer to the Driv-
ers, MarkVision and Utilities CD that ships with the printer.
Topology
Token-Ring RJ-45 UTP
Token-Ring DB9 STP
Ethernet 10BaseT/100BaseTX RJ-45 UTP
Ethernet 10BaseT RJ-45 UTP
Ethernet 10Base2 BNC thin coax
Ethernet 10BaseT/100BaseTX RJ-45 UTP
SCSI interface
Modem
Note: This option is only available with the OptraImage
package.
Topology
Ethernet 10BaseT RJ-45 UTP
Ethernet 10Base2 BNC thin coax
Ethernet 10BaseT/100baseTX RJ-45 UTP
16/4 Token-Ring—9-pin D-shell STP connector and RJ-45
UTP connector
Connectivity and network management
188