Print Quality Problems - Lexmark Optra W810 Reference

Print quality problems

You may be able to correct many print quality problems by replacing a supply or mainte-
nance item that has reached the end of its intended life. Check the operator panel for a
message about a printer consumable. See "Determining the status of supplies" on
page 146 for more information about other ways to identify consumables that need to be
replaced. Use the following table to find solutions to print quality problems you have
detected.
Print quality problems
Symptom
Blank pages
Black pages
Cause
The photoconductor cartridge
is defective.
The transfer roller is defective.
The printer was priming the
stapler.
The photoconductor cartridge
is defective.
Your printer requires servicing. Call for service.
Troubleshooting
214
Solution
Replace the photoconductor cartridge.
Refer to the User's Reference or the
documentation that ships with the new
photoconductor cartridge for detailed
instructions.
Replace the transfer roller.
Refer to the User's Reference or the
documentation that ships with the new
transfer roller for detailed instructions.
When you insert a new staple
cartridge, the printer verifies that
staples are in the proper position by
stapling a blank sheet of paper.
Replace the photoconductor cartridge.
Refer to the User's Reference or the
documentation that ships with the new
photoconductor cartridge for detailed
instructions.