Lexmark Optra W810 Reference page 80

Infrared Menu (continued)
Menu item
Infrared Buffer
Job Buffering
Note: Job Buffering is only
displayed when a hard disk
option is installed, is neither
defective nor Read/Write or
Write protected, and when Job
Buffer Size is not set to
Disabled.
* Factory default
Printer setting
= Disabled
= Auto*
= 5K to maximum size allowed
You can configure the size of the Infrared Buffer to meet the
requirements of your system. If the limited size of the input
buffer is preventing you from continuing work in your application
each time you send a job to the printer, you may want to
increase the buffer size.
The maximum size available for modification depends on the
amount of memory in your printer, the size of the other link
buffers, and whether Resource Save is set to On or Off. To
maximize the range for the Infrared Buffer size, you can disable
or reduce the size of the parallel, serial, LocalTalk, and USB
buffers.
Choose Auto to let the printer calculate a buffer size propor-
tional to the total amount of available printer memory. In most
cases, Auto is the recommended setting.
Note: Changing the Infrared Buffer setting automatically resets
the printer.
= Off*
= On
Job Buffering temporarily stores jobs on a hard disk option
before being printed, usually freeing the host computer while
the job prints.
If appears when the printer is turned on, or
61 Defective Disk
during disk format and write operations, refer to the User's
Reference for more information.
If Job Buffering is set to On, print jobs are buffered to the hard
disk option. If Job Buffering is set to Off, print jobs are not
buffered.
Note: Changing the Job Buffering setting automatically resets
the printer.
Changing printer settings
80