Serial Menu - Lexmark Optra W810 Reference

Parallel Menu (continued)
Menu item
Parallel Mode 1
Parallel Mode 2
* Factory default

Serial Menu

Use the Serial Menu to change settings affecting jobs sent to the printer through the serial
interface port. The Serial Menu is only displayed when a serial interface port is installed in
the printer. You must first select Serial Opt x before selecting from the following menu
items.
Serial Menu
Menu item
PCL SmartSwitch
* Factory default
Printer setting
= Off*
= On
The Parallel Mode 1 setting controls the pull up resistors on the
parallel port signals. It is useful for personal computers that
have open collector outputs on the parallel port signals.
Set Parallel Mode 1 to On to disable the resistors or to Off to
enable the resistors.
= Off
= On*
The Parallel Mode 2 setting determines whether the parallel
port data is sampled on the leading or trailing edge of strobe.
If Parallel Mode 2 is set to On, the parallel port data is sampled
on the leading edge of strobe.
If Parallel Mode 2 is set to Off, the parallel port data is sampled
on the trailing edge of strobe.
Printer setting
= Off
= On*
If PCL SmartSwitch is set to On, the printer examines the data
on the serial interface connection and selects PCL emulation if
the data indicates that is the printer language.
If both PCL SmartSwitch and PS SmartSwitch are set to Off,
the printer uses the language specified in the Printer Language
menu as the default. If only one SmartSwitch setting is set to
On, the printer uses that language as the default.
Changing printer settings
71