Lexmark Optra W810 Reference page 36

Paper Menu (continued)
Menu item
Custom Types
Output Bin
Note: Output Bin is only
displayed when either an
optional mailbox or optional
finisher is installed.
* Factory default
Printer setting
Custom Type x (where x represents 1 through 6)
= Paper*
= Card Stock
= Transparency
= Cotton Paper
= Labels
The Custom Types setting specifies the kind of print material
used for each of the Custom Types available in the Paper Type
menu item. This optimizes print quality settings when you select
print material from a paper source when the type is set to
Custom Type x.
If a user-defined name is available, it is displayed instead of
Custom Type x. The user-defined name is truncated to 14
characters.
Note: If two or more custom types share the same name, the
name only appears once in the Custom Types value list.
= Bin 1*
= Bin 2
= Bin 3
= Bin 4
= Bin 5
= Bin 6
= Bin 7
= Bin 8
= Bin 9
= Bin 10
The Output Bin setting specifies the default exit for printed
material. The available output bins are represented by
numbers. Since the Standard bin is not available when either a
mailbox or finisher is installed, that bin is never listed in this
menu item.
Note: Only installed bins are displayed.
If a user-defined name is available, it is displayed instead of Bin
x. The name is truncated to 14 characters.
Note: If two or more bins share the same name, the name only
appears once in the Output Bin value list.
Changing printer settings
36