Lexmark Optra W810 Reference page 70

Parallel Menu (continued)
Menu item
Job Buffering
Note: Job Buffering is only
displayed when a hard disk
option is installed, is neither
defective nor Read/Write or
Write protected, and when Job
Buffer Size is not set to
Disabled.
Advanced Status
Protocol
Honor Init
* Factory default
Printer setting
= Off*
= On
Job Buffering temporarily stores jobs on a hard disk option
before being printed, usually freeing the host computer while
the job prints.
If appears when the printer is turned on, or
61 Defective Disk
during disk format and write operations, refer to the User's
Reference for more information.
If Job Buffering is set to On, print jobs are buffered to the hard
disk option. If Job Buffering is set to Off, print jobs are not
buffered.
Note: Changing the Job Buffering setting automatically resets
the printer.
= Off
= On*
If Advanced Status is set to On, bidirectional communication is
enabled through the parallel interface. If Advanced Status is set
to Off, bidirectional communication in the parallel output buffer
is immediately flushed, and parallel port negotiation is disabled.
= Standard
= Fastbytes*
You can select Standard or Fastbytes protocol for the parallel
interface. Fastbytes is compatible with most existing parallel
interface implementations. Use Standard only if you experience
parallel interface problems.
Refer to the Technical Reference for more information about the
parallel interface.
= Off*
= On
The Honor Init setting determines whether the printer honors
hardware initialization requests from the computer. The
computer requests initialization by activating the INIT signal on
the parallel interface. Many personal computers activate the
INIT signal each time the computer is turned on and off.
Changing printer settings
70