Memory Errors - Lexmark Optra W810 Reference

Formatting devices
Formatting flash memory or disk erases all information currently stored on the device and
prepares the device to receive new resources. The files are not recoverable. The printer
displays a message on the operator panel if a device requires formatting before you can
download resources.

Memory errors

The following error messages may appear if the printer does not have enough memory to
process a print job or complete other printer functions.
Memory error messages
Message
35 Res Save Off
Deficient Memory
37 Insufficient
Collation Area
37 Insufficient
Defrag Memory
Explanation
The printer lacks the memory needed to enable Resource
Save. This message usually indicates too much memory is
allocated for one or more of the printer link buffers.
• Press to disable Resource Save and continue printing.
Go
• To enable Resource Save after you get this message:
– Make sure the link buffer is set to Auto, and exit the menus
to activate the link buffer changes. When
played, enable Resource Save from the Setup Menu.
– Install additional memory.
The printer memory (or optional disk, if installed) does not have
the space necessary to collate the print job.
• Press to print the portion of the job already stored and
Go
begin collating the rest of the job.
• Cancel the current job. Press
Menu is displayed. Press
appears on the second line of the operator panel display.
Press .
Select
The printer cannot defragment flash memory because the
printer memory used to store undeleted flash resources is full.
Press to clear the message.
Go
To avoid another
37 Insufficient Defrag Memory
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
Managing memory
178
Ready
or . The Job
Menu> <Menu
or until
Menu> <Menu Cancel Job
error message:
is dis-