Lexmark Optra W810 Reference page 59

Setup Menu (continued)
Menu item
Auto Continue
* Factory default
Printer setting
= Disabled*
= 5...255
Auto Continue defines the amount of time (between 5 and 255
seconds) the printer waits after detecting one of the following
errors before it resumes printing:
35 Res Save Off Deficient Memory
37 Insufficient Collation Area
37 Insufficient Defrag Memory
37 Insufficient Memory - Held Jobs may be lost. Go/Stop?
38 Memory Full
39 Complex Page
51 Defective Flash
52 Flash Full
53 Unformatted Flash
54 Network x Software Error
54 Serial Option x Error
54 Std Par ENA Connection Lost
54 Ser x Fax Connection Lost
54 Par x ENA Connection Lost
55 Insufficient Fax Buffer
56 Serial Port x Disabled
56 Std Parallel Port Disabled
56 Parallel Port x Disabled
58 Too Many Flash Options
58 Too Many Disks Installed
61 Defective Disk
62 Disk Full
63 Unformatted Disk
Insert Stapler
Operation Failed Jobs on Disk
Priming Failed Faxes on Disk
Priming Failed, Retry. Go/Stop
Print Jobs on Disk. Go/Stop
If one of these errors occurs and Auto Continue is set to
Disabled, the printer stops and waits for operator intervention.
This setting is also used as a timer. After an inactive period in
the menus, the printer automatically exits the menus and
returns to Ready.
Changing printer settings
59