Figure 11-1 A14 And A15 Test Connectors; Table 11-1 Automatic Fault Isolation References; Troubleshooting Using The Tam - HP 8560E Service Manual

RF Section

Troubleshooting Using the TAM

Troubleshooting Using the TAM
When using Automatic Fault Isolation, the TAM indicates suspected
circuits that need to be manually checked. Use
to locate the manual procedure.
Table 11-2 on page 585
each Manual Probe Troubleshooting test.
illustrates the location of A15 test connectors.
Figure 11-1 A14 and A15 Test Connectors
Table 11-1 Automatic Fault Isolation References
Suspected Circuit Indicated by
Automatic Fault Isolation
Check 2nd IF Amplifier
Check 2nd IF Distribution
Check 10.7 MHz IF Out of Double
Balanced Mixer
Check 300 MHz CAL OUTPUT
584
lists assembly test connectors associated with
Figure 11-1 on page 584
Manual Procedure to Perform
Third Converter
Third Converter
Third Converter
Calibrator Amplitude Adjustment in
Chapter 2
Table 11-1 on page 584
Chapter 11