Troubleshooting Using the TAM
When using automatic fault isolation, the TAM indicates suspected
circuits that need to be manually checked. Use
to locate the manual procedure.
Table 10-5 on page 517
each manual probe troubleshooting test.
illustrates the location of A14 and A15 test connectors.
The pin locations of a 16-pin TAM connector are indicated in
10-4 on page
between a measured signal line and the TAM connector pin.
Figure 10-3 A14 and A15 Test Connectors
Chapter 10
lists assembly test connectors associated with
516.
Table 10-3 on page 516
Synthesizer Section
Troubleshooting Using the TAM
Table 10-4 on page 516
Figure 10-3 on page 515
Figure
indicates the correspondence
515