Set Copy To Size; Set Collation; Set Scale; Set Darkness - Lexmark X422 User Reference Manual

Printing, copying, faxing, and scanning

Set copy to size

To choose the size print media your copies will be made on, press Copy, press the down arrow until
Copy To is highlighted, and then press the right or left arrow until you see the size you need. Your
original document is automatically scaled up or down to fit the Copy To print media size.

Set collation

To enable or disable collation for multiple page jobs, press Copy, press the down arrow until Collate
is highlighted, and then press the right or left arrow to turn collate on or off. Collation orders your
multiple page job as 1, 2, 3, 1, 2, 3, 1, 2, 3 rather than 1, 1, 1, 2, 2, 2, 3, 3, 3.

Set scale

To set the scale of your copies in terms of a percentage of your original document, press Copy, press
the down arrow until Scale is highlighted, and then press the right arrow to increase the output
scale, or the left arrow button to decrease the output scale.

Set darkness

To adjust the darkness of your copies, press Copy, press the down arrow until Darkness is
highlighted, and then press the right arrow to increase the darkness, or the left arrow to decrease the
darkness.

Specify content

To specify the type of content contained in your original document, press Copy, press the down arrow
until Options is highlighted, and then press . Use the left and right arrow buttons to choose the
content type that matches your original document. Choose among Text/Graphics, Photo, and
Text.

Set the duplex feature

To turn duplex copying on or off, press Copy, press the down arrow until Options is highlighted, and
then press . Press the down arrow button until Duplex is highlighted. Use the left and right arrow
buttons to set duplexing to off, long edge, or short edge.
Note: To copy double-sided original documents, you must use the scanner flatbed, and
scan each side.
Making copies
28