Lexmark X422 User Reference Manual page 170

Defaults Menu – General Settings(continued)
Menu item Purpose
Power Saver To specify the amount of time (in
minutes) the MFP waits after a
job is completed before it goes
into a reduced power state. This
menu item is also available in
the
Alarm Control To establish whether the MFP
sounds an alarm when the MFP
requires operator intervention.
Factory Defaults To return the MFP settings to
the factory default values.
This menu item is also available
in the
Using the MFP control panel and menus
Setup Menu.
Utilities Menu.
Values and descriptions
Disabled This value does not appear unless
Energy Conserve is set to Off. To set
Energy Conserve to Off, refer to the
Technical Reference.
15...240 (45*) Specifies the amount of time after a
print job before the MFP goes into
Power Saver mode.
Print the menu settings page to
determine the current Power Saver
setting. When the MFP is in Power
Saver mode, it is still ready to receive
print jobs.
Select 15 to put the MFP in Power
Saver mode 15 minutes after it
finishes a print job. This uses much
less energy, but requires more warm-
up time for the MFP. Select 15 if your
MFP shares an electrical circuit with
room lighting and you notice lights
flickering.
Select a high value if your MFP is in
constant use. Under most
circumstances, this keeps the MFP
ready to print with minimum warm-up
time. Select a value between 15 and
240 minutes if you want a balance
between energy consumption and a
shorter warm-up period.
Off MFP does not sound an alarm.
Single* MFP sounds three quick beeps.
Continuous MFP repeats three beeps every 10
seconds.
Restore Now • All menu items are returned to the
factory default values except:
– Display Language.
– All settings in the Fax Menu,
• All downloaded resources (fonts,
macros, and symbol sets) in MFP
memory (RAM) are deleted.
(Resources residing in flash
memory are unaffected.)
Do Not User-defined settings remain.
Restore*
Menus
170
E-mail/FTP, Network Menu, and
USB Menu.