Lexmark X422 User Reference Manual page 233

Understanding the MFP control panel messages
Message
Resetting the
Printer
Scan next page
Done
Cancel
Scanner ADF Cover Open The scanner document feeder
Scanner locked,
release lock under
scanner
Scanning . . .
Searching . . .
Searching for
Shortcut #<x>
Cancel
Selected jobs
deleted.
Selected jobs
submitted for
printing.
Sending Page
Server connection
failed
What this message means
The MFP is resetting to the current
default settings. Any active print
jobs are canceled.
The last page submitted has been
scanned.
cover is open.
The protective scanner carriage
lock is engaged.
Your document is being scanned.
The system is searching the stored
shortcuts for a match to your entry.
The system is searching for a
shortcut matching your entry.
The held jobs you selected have
been deleted.
The held jobs you selected will
print.
The displayed fax page number is
being sent.
The device failed to connect to the
network server.
MFP messages
233
What you can do
Wait for the message to clear.
Place your next original on the scanner
flatbed, highlight Scan next page and
press .
Highlight Done and then press
the job.
Highlight Cancel and then press
cancel the job.
Close the cover.
Turn the MFP off and release the lock.
Refer to the Setup Guide for more
information.
Press to cancel scan.
No action required.
Wait for the search to complete.
Highlight Cancel and press
typing a new entry.
No action required.
No action required.
No action required.
For e-mail, make sure the device is
configured correctly for e-mail, and make
sure the e-mail server is working properly.
For FTP, make sure the device is
configured correctly for FTP, the
username and password are correct, and
the FTP server is working properly.
For Scan to PC, make sure the Scan to
PC applet is running on the PC, and any
firewalls are correctly configured
(Windows XP has a default firewall; see
your support person if necessary).
For Lexmark Document Solutions Suite,
verify the host machine containing the
Lexmark Document Solutions Suite server
is up and running.
to finish
to
to begin