Lexmark X422 User Reference Manual page 209

NetWare
Network/USB – NetWare
Menu item
View Login Name
View Print Mode
View Network
Number
Activate
Ethernet 802.2
Ethernet 802.3
Ethernet Type II
Ethernet SNAP
Packet Burst
NSQ/GSQ Mode
Using the MFP control panel and menus
Purpose
Specifies the login name for
NetWare which is the same as
the adapter name.
Specifies the print server for
the remote MFP.
Specifies the NetWare number
which is part of the hardware
address.
To turn the NetWare protocol
on (activated) or off
(de-activated).
Specifies the Internetwork
Packet Exchange (IPX) frame
type, which is NetWare
Protocol. Defines the frame
types that the adapter can use
to initiate conversations.
Specifies the Internetwork
Packet Exchange (IPX) frame
type, which is Transfer
Protocol. Defines the frame
types that the adapter can use
to initiate conversations.
Defines the cabling. An
Ethernet Type II cable is used
as the frame type.
Subnet Access Point (SNAP)
allows for managing devices
on the network.
Specifies a mode for rapid
data transmission.
Nearest Service Queue (NSQ)
searches with a limited scope
only for the file servers.
General Service Queue (GSQ)
searches for all services and
file servers.
Values and descriptions
View only. Set this from the Web page.
View only. Set this from the Web page.
View only. Set this from the Web page.
On*
Off
On*
Off
On*
Off
On*
Off
On*
Off
On
Off*
On
Off*
Menus
209