Lexmark X422 User Reference Manual page 227

Understanding the MFP control panel messages
Message
37 Insufficient
memory for Flash
Memory Defragment
operation
37 Insufficient
memory to collate job
37 Insufficient
memory, some Held Jobs
may be lost
38 Memory Full
39 Complex page, some
data may not have
printed
41 Unsupported
Firmware Card
50 PPDS Font Error
51 Defective flash
detected
52 Not enough free
space in flash memory
for resources
What this message means
The MFP cannot defragment flash
memory because the memory
used to store undeleted flash
resources is full.
There is not enough memory to
collate the print job.
Held jobs will be deleted in order to
process the current job.
The MFP is processing data, but
the memory used to store pages is
full.
The page may not print correctly
because the print information on
the page is too complex.
The MFP detects an unsupported
version of firmware on the installed
firmware card.
The MFP has received a request
for a font that is not installed.
The MFP detects defective flash
memory.
There is not enough space in the
flash memory to store the data you
are trying to download.
MFP messages
227
What you can do
Install additional memory.
Turn the MFP off, wait 15 seconds, and
then turn it on. Print and Hold jobs will be
lost.
Press to print the portion of the job
already stored and begin collating the rest
of the job.
Highlight Cancel and press
the current job.
To avoid this error in the future install more
memory.
To avoid this error in the future:
Simplify the print job by reducing the
amount of text or graphics on a page and
deleting unnecessary downloaded fonts or
macros.
Install additional memory.
To avoid this error in the future:
Reduce the complexity of the page by
reducing the amount of text or graphics on
the page and deleting unnecessary
downloaded fonts or macros.
Set Page Protect to On in the Setup
Menu.
Install additional memory.
See also: Setup Menu
Turn the MFP off, and then press and hold
Start while turning it on. The MFP reads
the code on the system card and
bypasses the code on the firmware card.
Remove the firmware card.
See also: Setup Guide
Highlight Continue printing and press
to clear the message and continue
printing the current job.
You must install different flash memory
before you can download any resources to
flash.
Install flash memory with more storage
capacity.
to cancel