Replace And Mount Battery - Pentax W-1502N Series Instruction Manual

NOTE:
1. The battery's working time will be affected by many factors, such as ambient
temperature, recharging time, recharging and discharging times. So we suggest
the users recharge the battery full or prepare several full batteries before
operation.
2. The battery symbol only indicates power capability for current measurement
mode. The power consumption in distance measurement mode is more than in
angle mode, if the instrument enters into distance measurement mode from
angle mode, the power maybe auto-off because of lower battery.
3. The symbol only indicates the supply power but not the instantaneous power
change. And if the measurement mode changes, the symbol will not show the
power's decrease or increase immediately.
4. It is suggested that user should check every battery power before field work.

1.6.2 Replace and mount battery

2) Push one battery case towards upper one box into the end, upper battery case
will lock automatically
Two battery are equipped with W-1502N, any one can
work individually, so it is possible to take off one
battery for recharging when the instrument is
working.
1. Battery take off
1) As left figure shown, push down the flat battery
clamp to take off the upper battery case.
2) As left figure shown, anticlockwise turn the round
battery clamp 90°to take off the lower battery case.
2. Mount the battery
1) Put battery into battery case with contactor towards
inside.
11