Table of Contents
Advertisement
4.3.1 Horizontal angle(right angle) and vertical angle measurements..22
4.3.2 Horizontal angle switch between right and left................. 23
4.3.3 Setting horizontal angle with the "L.Angle" key................ 24
4.3.4 Setting horizontal angle with the "S.Angle" key................ 25
key............................................................... 26
4.3.6 Carrying out angle retesting with the "Repeat" key............. 27
4.4 Distance measurement mode..................................... 31
4.4.1 Distance measurement and measuring mode setting........... 31
4.4.2 Fine/Tracking distance measurement.......................... 32
4.4.3 Accurate Measurement and Track mode....................... 34
4.4.4 Exchange of distance units....................................35
4.4.5 Distance stake out measurement.............................. 35
4.4.6 Remote Elevation Measurement（REM）...................... 37
4.4.7 Missing Line Measurement (MLM)............................ 42
4.4.8 Line-height Measurement.....................................45
4.5 Coordinate Measurement Mode.................................. 50
4.5.1 Setting coordinate of occupied point.......................... 50
4.5.2 Setting backsight point....................................... 51
4.5.3 Setting instrument height and prism height.................... 53
4.5.4 Operation of coordinate measurement.........................54
4.5.5 Traverse Surveying.......................................... 55
4.5.6 Offset Measurement Mode....................................58
4.6 About........................................................... 68
5. Check and Adjustment.............................................. 69
5.1 The Instrument Constant......................................... 69
5.2 Plate Level and Circular Level..................................... 70
5.2.1 Plate Level................................................... 70
5.2.2 Circular Level................................................ 70
5.3 The Optical Sight................................................ 71
5.4 Optical Plummet and Laser Plummet.............................. 71
5.4.1 Optical Plummet(factory optional)............................. 71
5.4.2 Laser Plummet............................................... 72
5.5 Vertical Cross-hair on Telescope.................................. 73
5.6 Horizontal Collimation Error C.................................... 74
5.7 Vertical Index Error.............................................. 75
6. Specifications.......................................................78
8. Standard components............................................... 81
2
Advertisement
Table of Contents
