Basic Measurement Program; Run The Program "Basic Measurement; Basic Measurement Screen Introduction - Pentax W-1502N Series Instruction Manual

4. Basic measurement program

4.1 Run the program "Basic Measurement"

Function

4.2 Basic measurement screen introduction

The function keys display in the lower left corner of screen,and they vary
from one measurement mode to another.There are some function keys
under every measurement mode being listed in the following table.
Measurement
mode
key function
S.Zero Set current horizontal angle as zero
S.Angle Set current horizontal angle
L.Angle Lock horizontal angle
Repeat Retest horizontal angle
V/% Switch between vertical angle and percent grade
L/R Angle Horizontal angle switch between left and right
Mode Set Fine,N Fine,Loop Fine,Track measurement
mode
m/ft Switch among meter,international
American feet in
terms of distance unit
Setout Set out measurement mode
REM
Start REM function
MLM Start MLM function
LHM Start LHM function
Mode Set Fine,N Fine,Loop Fine,Track measurement
mode
Current
parameters
Measurement mode
24
feet and