Angle Measurement Mode - Pentax W-1502N Series Instruction Manual

4.3 Angle measurement mode

4.3.1 Horizontal
measurements
At first, make sure the operation is under angle measurement mode.
Operation steps
1 Collimate the
target A
OCC PT Set the coordinate of instrument station
S.BS Set the coordinate of a backsight point
Setup Set instrument height and target height
Line Start traverse surveying
Offset Start
Offset,PLANE Offset,CYL.Offset) function
Coor Set displayed coordinate order as NEZ or ENZ
Order
Save Save coordinate of instrument station or not
Coor
Ang.Unit Set Ang.Unit as DMS,GON,MIL
Dist Unit Set Dist Unit as m,UsFeet,IntFeet
Stop Stop distance measurement
Exit Exit basic measurement program
angle(right
Keys
first Collimate
A
offset measurement(ANG.Offset,DIST
angle) and
Display
25
vertical angle