Pentax W-1502N Series Instruction Manual page 6

and loss of profits by any disaster, (an earthquake, storms, floods etc.).
4) The manufacturer assumes no responsibility for any damage, and loss of
profits due to a change of data, loss of data, an interruption of business etc.,
caused by using the product or an unusable product.
5) The manufacturer assumes no responsibility for any damage, and loss of
profits caused by usage except for explained in the user manual.
6) The manufacturer assumes no responsibility for damage caused by wrong
transport, or action due to connecting with other products.
Safety Standards for Laser
W-1502N series adopts the safe and visible laser on the basis of
"Specification Standard of radiant products" (FDA CDRH.21CFR Part 1040.10
and 1040.11) and "Safety of laser products – parts 1: Equipment
classification, requirements and user's guide" (IEC 60825-1:2001).
According to above standards, W-1502N series is class Ⅲa/3R laser products.
When the prism or reflective sheet is selected in Config mode as target, the
output is equivalent to the safer class 1.
Once the instrument is damaged, do not disassemble it. You'd better contact
PENTAX or local dealer.
Labels
Follow the safety instructions on the labels as well as in this manual to
ensure safe use .
Laser emit
5