Table of Contents
Advertisement
【TiltXY】dynamic display of electronic bubble
【T.P】observation and setting of temperature and atmospheric pressure
【Target】target condition of surveying
【Battery】dynamic display of battery level
【Exit】exit the electronic bubble screen
Secondly,level it by turning three foot screws and ensure the bubble is in the
plate level.Make sure the red spot is in the center.
Note:
【A.OFF】 don't compensate X axis and Y axis,and turn off the popup function
of electronic bubble.
As
shown,you
transformation
options by pressing the lower right
button.
【XYON】compensate horizontal angle
and vertical angle at the same time
【XONYOFF】just compensate X axis
【XYOFF】 don't compensate X axis and
Y axis
In PENTAX FieldGenius software, the
Level display is always shown as left
figure.
17
can
realize
of
compensation
Advertisement
Table of Contents
