Replacing Maintenance Parts - Epson SC-S80600 Series User Manual

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Maintenance menu U "The Maintenance Menu" on
page 110
c
Important:
Maintenance Counter
The printer tracks amounts consumed using the
maintenance counter and displays a message when
the counter reaches the warning level.
If you replace parts when the message "
Parts" is displayed, the counter is cleared
automatically.
If you need to replace the parts before the message is
displayed, select Replace Parts from the setup
menu.
Maintenance menu U
on page 110
When " Replace Parts" is displayed
Replace all parts supplied with the Maintenance Parts
Kit. Printing cannot be performed if the parts are not
replaced.
Make sure you use the Maintenance Parts Kit for this
printer.
"Options and Consumable Products" on
U
page 123
The Maintenance Parts Kit contains the following parts.
Make sure you replace all of the maintenance parts at the
same time.
❏ Wiper unit (x1)
❏ Flushing pad (x1)
❏ Air filters (x2)
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 63
U
Maintenance
Replace
"The Maintenance Menu"

Replacing Maintenance Parts

A
When the message is displayed, press the Z
button.
B
After the print head moves to the left end of the
printer, open the right maintenance cover.
C
Place your fingers in the groove on the back of the
wiper unit, and tilt it forward a little.
D
Grip the sides, and pull it straight up to lift it out.
79