Chapter 5 Replacing Consumable Products/Maintenance Parts; Precautions During Replacement; Replacement Messages - Epson WorkForce AL-M300 Series User Manual

Chapter 5
Replacing Consumable Products/Maintenance Parts

Precautions During Replacement

Always observe the following handling precautions when replacing consumable products or
maintenance parts.
For details about the replacements, see the instructions that come with the consumable products.
!
Caution:
❏ Be careful not to touch the fuser, which is marked with a caution label, or the surrounding
areas. If the printer has been in use, the fuser and surrounding areas may be very hot.
❏ Do not dispose of used consumable products or maintenance parts in fire, as they may explode
and cause injury. Dispose of them according to local regulations.
❏ Provide enough space for the replacement procedure. You will have to open some parts (such as
the printer cover) of the printer when you are replacing consumables or maintenance parts.
❏ Do not install used consumable products or maintenance parts that reach end of service life into
the printer.
For details about the handling precautions, see "Handling the consumable products and maintenance
parts" on page 18.

Replacement Messages

If a consumable product or maintenance part reaches the end of its service life, the printer displays the
following message on the LCD panel or the window of EPSON Status Monitor.
Note:
Messages appear for one consumable product or maintenance part at a time. After replacing a
consumable product or maintenance part, check the LCD panel for replacement messages for other
consumable products or maintenance parts.
AL-M300/AL-M400 Series
Replacing Consumable Products/Maintenance Parts
User's Guide
125