SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
When to perform
When using SC-S80600L Series/
SC-S60600L Series
❏
When LED lamp on ink unit flashes
blue (once every 3 weeks)
❏
Before starting operations for the day
*
(WH/MS only)
❏
When checking if nozzles are clogged
❏
When checking which colors are
clogged
❏
Horizontal stripes or tint unevenness
(banding) are appeared.
When a clog is found after checking for
clogged nozzles
When the printer will not be used for an
extended period (and switched off)
(SC-S80600 Series/SC-S80600L Series
only)
❏
When changing the spot color to use
(WH <= => MS)
❏
When changing between 10 color
mode and 9 color mode
When dirt from rollers adheres to print
outs
When it is hard to see inside the printer
When a greasing message is displayed on
the control panel
* When 10 color mode is selected on SC-S80600 Series/SC-S80600L Series.
Maintenance
Operation
Shaking Ink Supply Units
"Shaking" on page 74
U
U
U
Pre-Storage Maint.
U
"Change Color Mode (SC-S80600 Series/SC-S80600L Series only)" on
U
page 89
Pressure rollers
Inside the front cover
U
Applying the supplied grease to the carriage rod
U
62