Replacement Procedure - Epson SC-S80600 Series User Manual

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
❏ Once every three weeks (All colors excluding WH/
MS)
Even after installing an ink cartridge in the printer,
remove and shake it periodically.
Approx. 15 times in 5 seconds
Shaking method
A
Make sure the printer is on, and then remove the
ink cartridge.
When replacing a cartridge, remove the new one
from the bag.
B
Hold the cartridge horizontally and shake it in
both directions about 5 cm approx. 15 times in 5
seconds.
In the case of OR, WH, or MS, shake it well
approx. 50 times in 15 seconds during
replacement only.

Replacement procedure

If one of the installed ink cartridges is expended,
printing cannot be performed.
c
Important:
When the message Ink Cartridge Expended
appears with use of WH/MS ink, replace the
cartridge with a new one immediately.
If the printer is left with the ink remaining alert
displayed, a print head or other part may be
damaged.
If an ink cartridge is expended while printing, you can
continue printing after replacing the ink cartridge.
Maintenance
If you continue to use ink cartridges that are running
low, you may need to replace the ink cartridge while
printing. If you replace the ink cartridge while printing,
colors may look different depending on how the ink
dries. If you want to avoid issues such as this, we
recommend replacing the cartridge before printing.
You can still use the removed ink cartridge in the future
until the ink cartridge is expended.
The following procedure explains how to replace ink
cartridges and Cleaning Cartridge.
c
Important:
Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson's warranties, and under certain
circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may not
be displayed, and use of non-genuine ink is recorded
for possible use in service support.
A
Make sure the printer is on.
B
Lift the lock lever for the cartridge you intend to
replace.
72